Technical Blog

A furnace heating coil burns out, and the right replacement isn’t always obvious. Here are the four furnace element materials by temperature, how to choose, and how to tell when a coil is done.

Understanding the technical differences between standard Kanthal A1 and Advanced Powder Metallurgy (APM) wire can save you hundreds in maintenance costs.

If your kiln is firing slowly or stalling before it reaches cone, work through these five causes in order — from worn elements to a drifting thermocouple.

A five-minute check tells you whether a kiln element is healthy, aging, or dead. Here is how to measure resistance and check for a ground fault safely.

A kiln that trips its breaker is almost always a grounded element, trapped moisture, or a failing relay. Here is how to find the cause safely.

Five professional habits that can add 20% or more to the lifespan of your kiln elements — from the break-in fire to regular vacuuming and proper venting.

A technical deep dive into how your studio electrical setup affects your kiln performance and element design.

Ordering a custom replacement coil starts with four measurements. Here is exactly what to record, and how, so your new element fits and performs the first time.

Kiln elements rarely fail all at once — they fade. Spotting the warning signs early lets you replace them on your schedule, not in the middle of a firing.

When a heat pump runs but blows cool air in cold weather, the auxiliary heating coils are a prime suspect. Here is how to narrow down the cause.

Both will heat your equipment — but cost, lead time, and availability set them apart. Here is how to choose between a custom-wound element and the OEM part.